HOW TO USE THE STANDARD MENU
Figure 1 shows the standard menu.
CPAP WELCOME
>>>>>>
RAMP: 10min menu 
EPR SETTING: 1 |
|
change | exit |
USED HRS: | 08000 |
| exit |
USAGE: 1000/1068 | |
| exit |
MASK: ULTRA | |
change | exit |
SW: SX3960200
exit
AUTOSET WELCOME
>>>>>>
SETTLING: 10min menu 
USED HRS: | 08000 |
| exit |
USAGE: 1000/1068 | |
| exit |
MASK: ULTRA |
|
change | exit |
SW: SX3960200 exit
Figure 1 : Standard menu screens: CPAP and AutoSet modes
You enter the standard menu from the standby (RAMP or SETTLING) screen, by pressing the Left (Menu) key.
HOW TO CHANGE THE EXPIRATORY PRESSURE RELIEF SETTING
Note: EPR may not be available in all regions.
In CPAP mode, your clinician may have set up your device to deliver expiratory pressure relief (EPR). This can be used to help ease any discomfort you may experience when breathing out during treatment. There are four settings:
•OFF (no EPR)
•1 (lowest EPR)
•2
•3 (highest EPR).
The EPR SETTING screen only appears if your clinician has enabled access to EPR settings. To change the EPR setting, select Change (Left key). Press the Up or Down keys until you see the setting that you require.
HOW TO SELECT THE MASK TYPE
Scroll to MASK and select Change (Left key). Press the Up or Down keys until you see the mask type that you require.
HOW TO USE THE STANDARD MENU 17
