S8 MODULES
Note: Do not remove modules while power is connected to the S8 AutoSet Spirit.
Your S8 AUTOSET SPIRIT will have one of two modules fitted to the back: a blank module or a RESSCAN Data Card module.
USING A BLANK MODULE
Please refer to the illustrations in section F of the illustration sheet.
The blank module is a protective cover on your S8 AUTOSET SPIRIT. At times, you may wish to remove or attach the module, for example to use another module.
To remove the blank module, pull it off the back of the S8 CLASSIC to show the data communications port
To attach the blank module, push the blank module onto the data communications port, until the module clicks into place
Note: To protect the data communications port, always ensure there is a module attached to the back of the device.
USING A RESSCAN DATA CARD MODULE
Please refer to the illustrations in section G of the illustration sheet.
The RESSCAN Data Card module is an accessory to the S8 AUTOSET SPIRIT. Use a
RESSCAN Data Card with the Data Card module to collect data and update settings in the S8 AUTOSET SPIRIT. The module and card give your clinician convenient access to data about your treatment, and can provide you with new device settings from your clinician without your having to leave home.
ATTACHING THE MODULE
To attach the Data Card module, push it onto the data communications port at the back of your S8 AUTOSET SPIRIT until it clicks into place
REMOVING THE MODULE
To remove the Data Card module, pull it off the back of the S8 AUTOSET SPIRIT
Note: To protect the data communications port, always ensure there is a module attached to the device.
USING THE DATA CARD TO COLLECT DATA
Please refer to the illustrations in section H of the illustration sheet.
If your clinician needs to review your treatment, they will ask you to use the Data Card to copy data from your S8 AUTOSET SPIRIT, and to return the card to them. The Data Card will be provided in a convenient mailback envelope.
Data that is copied to a Data Card is still stored and available on the S8 AUTOSET SPIRIT. It takes up to 30 seconds to copy data onto the Data Card.
S8 MODULES | 23 |
