Manuals / ResMed / Household Appliance / Humidifier

ResMed s8 manual How To Use The Keypad, Lcd Screen

Models: s8

1 50

Download 50 pages 57.93 Kb

Page 19

HOW TO USE THE KEYPAD

HOW TO USE THE KEYPAD

The control panel of the S8 AUTOSET SPIRIT includes an LCD screen and keypad for navigating through the menus and delivering treatment.

LCD screen

Up key

Right key Left key

Start/Stop key

Down key

LCD SCREEN

The LCD screen displays the menus and treatment screens.

The LCD backlight turns off after two minutes of inactivity. It turns back on when you press a key.

KEYPAD KEYS

The S8 AUTOSET SPIRIT keypad has the following keys:

Key		Function

Start/Stop		• Starts or stops treatment.
		• Extended hold (for at least three seconds) starts the mask-

		fitting feature.

Up		• Allows you to scroll through the S8 AutoSet Spirit menus and
		submenus, and increase the setting options.

Down		• Allows you to scroll through the S8 AutoSet Spirit menus and
		submenus, and decrease the setting options.

Left		• Performs the function indicated by the guiding text displayed
		above it on the LCD screen. Guiding text includes menu,
		change and apply.

Right		• Performs the function indicated by the guiding text displayed
		above it on the LCD screen. Guiding text includes exit and
		cancel.

HOW TO USE THE KEYPAD 13

Image 19

ResMed s8 manual How To Use The Keypad, Lcd Screen

Contents

ILLUSTRATIONS S8 AutoSet Spirit System12 G DATA CARD MODULE H USING THE DATA CARDE HUMIDAIRE 3i AND S8 BLANK MODULEReorder number 338193/1 S8 AutoSet Spirit SystemDistributed by Manufactured byUS DESIGNATED AGENT ResMed Corp HOW TO USE THE KEYPAD CONTENTSHOW TO USE THE S8 AUTOSET SPIRIT HOW TO ATTACH A HUMIDIFIERSYSTEM SPECIFICATIONS CLEANING AND MAINTENANCEFREQUENTLY ASKED QUESTIONS TROUBLESHOOTINGMEDICAL INFORMATION INTRODUCTIONPlease read this manual carefully before use cerebrospinal fluid leak, recent cranial surgery, or trauma drying of the nose, mouth or throat nosebleed Page THE S8 AUTOSET SPIRIT SYSTEM Air tubing 3 m C-3 DC-12converter C-4 Front cap not available in all regions C-2Blank module C-5 SET UP THE S8 AUTOSET SPIRIT HOW TO USE THE S8 AUTOSET SPIRITASSEMBLE THE MASK 1Make sure the power is on MASK FIT excelnt4After three minutes, the pressure reverts to the set pressure and treatment will begin HOW TO ATTACH A HUMIDIFIER Page LCD SCREEN HOW TO USE THE KEYPADWhen you have scrolled to the item you require Screen Setting OptionsHOW TO CHANGE THE RAMP OR SETTLING TIME Table 2 Ramp and Settling FunctionsPage OFF no EPR 1 lowest EPR 2 3 highest EPR HOW TO USE THE STANDARD MENUFigure 1 shows the standard menu AUTOSET WELCOMEThe following table shows the setting that should be selected for each mask type CPAP HOW TO USE THE DETAILED MENUSETTINGS MENU HOW TO USE THE DETAILED MENUOFF no EPR 1 lowest EPR 2 3 highest EPR to change the option to ON or OFF Message Description Action USING A BLANK MODULE S8 MODULESUSING A RESSCAN DATA CARD MODULE Remove the Data Card from the Data Card module S8 MODULES Page PERIODIC CLEANING CLEANING AND MAINTENANCEDAILY CLEANING WEEKLY CLEANINGREPLACING THE AIR FILTER To replace the air filter2.Remove and discard the old air filter 4.Replace the air filter coverFREQUENTLY ASKED QUESTIONS ON AN AIRCRAFT ALTITUDE CHANGESPossible Cause TROUBLESHOOTINGProblem SolutionSolution ProblemPossible Cause Call service ProblemSolution SYSTEM ERRORSettings Error Remove Card ProblemSolution Card Error Remove CardPower outlet for HumidAire SYSTEM SPECIFICATIONSDimensions H x W x D 112 mm x 164 mm x 145 mm Weight 1.3 kgElectromagnetic Compatibility Electromagnetic environment SYSTEM SPECIFICATIONSEmissions test ComplianceElectromagnetic Immunity testIEC60601-1-2 Compliance levelCompliance SYSTEM SPECIFICATIONSImmunity test IEC60601-1-2Recommended separation distances between portable and mobile RF communications equipment and the S8 series of devices Warranty Period LIMITED WARRANTYProduct Page INDEX access 14 change 14 exit 14 scrolling