Manuals / ResMed / Household Appliance / Humidifier

ResMed s8 Introduction, Medical Information, Please read this manual carefully before use

Models: s8

1 50

Download 50 pages 57.93 Kb

Page 7

INTRODUCTION

Thank you for choosing the S8 AUTOSET SPIRIT™ flow generator. The S8 AUTOSET

SPIRIT is a compact, all-in-one package with an inbuilt power supply and the option of integrated data management and humidification.

This user manual contains the information you need for the correct use of your

S8 AUTOSET SPIRIT.

YOUR RESPONSIBILITY

The owner or user of this system shall have sole responsibility and liability for any injury to persons or damage to property resulting from:

•operation which is not in accordance with the operating instructions supplied

•maintenance or modifications carried out unless in accordance with authorised instructions and by authorised persons.

Please read this manual carefully before use.

This manual contains special terms and icons that appear in the margins to draw your attention to specific and important information.

•Warning alerts you to possible injury.

•Caution explains special measures for the safe and effective use of the device.

•Note is an informative or helpful note.

MEDICAL INFORMATION

ABOUT THE S8 AUTOSET SPIRIT

The S8 AUTOSET SPIRIT self-adjusting sleep apnoea system is indicated for the treatment of obstructive sleep apnoea (OSA) in adult patients. The S8 AUTOSET SPIRIT self- adjusting sleep apnoea system has two treatment modes: AutoSet and fixed-pressure CPAP.

The S8 AUTOSET SPIRIT system is intended for home and hospital use.

CONTRAINDICATIONS

The S8 AUTOSET SPIRIT is not a life support device and may stop operating during power failure or certain fault conditions. It should not be used by patients who are dependent on continuous therapy.

Positive airway pressure therapy may be contraindicated in some patients with the following pre-existing conditions:

•severe bullous lung disease

•pneumothorax

•pathologically low blood pressure

•dehydration

INTRODUCTION 1

Image 7

ResMed s8 Introduction, Medical Information, Please read this manual carefully before use

Contents

ILLUSTRATIONS S8 AutoSet Spirit System12 G DATA CARD MODULE H USING THE DATA CARDE HUMIDAIRE 3i AND S8 BLANK MODULEReorder number 338193/1 S8 AutoSet Spirit SystemDistributed by Manufactured byUS DESIGNATED AGENT ResMed Corp HOW TO USE THE KEYPAD CONTENTSHOW TO USE THE S8 AUTOSET SPIRIT HOW TO ATTACH A HUMIDIFIERSYSTEM SPECIFICATIONS CLEANING AND MAINTENANCEFREQUENTLY ASKED QUESTIONS TROUBLESHOOTINGMEDICAL INFORMATION INTRODUCTIONPlease read this manual carefully before use cerebrospinal fluid leak, recent cranial surgery, or trauma drying of the nose, mouth or throat nosebleed Page THE S8 AUTOSET SPIRIT SYSTEM Air tubing 3 m C-3 DC-12converter C-4 Front cap not available in all regions C-2Blank module C-5 SET UP THE S8 AUTOSET SPIRIT HOW TO USE THE S8 AUTOSET SPIRITASSEMBLE THE MASK 1Make sure the power is on MASK FIT excelnt4After three minutes, the pressure reverts to the set pressure and treatment will begin HOW TO ATTACH A HUMIDIFIER Page LCD SCREEN HOW TO USE THE KEYPADWhen you have scrolled to the item you require Screen Setting OptionsHOW TO CHANGE THE RAMP OR SETTLING TIME Table 2 Ramp and Settling FunctionsPage OFF no EPR 1 lowest EPR 2 3 highest EPR HOW TO USE THE STANDARD MENUFigure 1 shows the standard menu AUTOSET WELCOMEThe following table shows the setting that should be selected for each mask type CPAP HOW TO USE THE DETAILED MENUSETTINGS MENU HOW TO USE THE DETAILED MENUOFF no EPR 1 lowest EPR 2 3 highest EPR to change the option to ON or OFF Message Description Action USING A BLANK MODULE S8 MODULESUSING A RESSCAN DATA CARD MODULE Remove the Data Card from the Data Card module S8 MODULES Page PERIODIC CLEANING CLEANING AND MAINTENANCEDAILY CLEANING WEEKLY CLEANINGREPLACING THE AIR FILTER To replace the air filter2.Remove and discard the old air filter 4.Replace the air filter coverFREQUENTLY ASKED QUESTIONS ON AN AIRCRAFT ALTITUDE CHANGESPossible Cause TROUBLESHOOTINGProblem SolutionSolution ProblemPossible Cause Call service ProblemSolution SYSTEM ERRORSettings Error Remove Card ProblemSolution Card Error Remove CardPower outlet for HumidAire SYSTEM SPECIFICATIONSDimensions H x W x D 112 mm x 164 mm x 145 mm Weight 1.3 kgElectromagnetic Compatibility Electromagnetic environment SYSTEM SPECIFICATIONSEmissions test ComplianceElectromagnetic Immunity testIEC60601-1-2 Compliance levelCompliance SYSTEM SPECIFICATIONSImmunity test IEC60601-1-2Recommended separation distances between portable and mobile RF communications equipment and the S8 series of devices Warranty Period LIMITED WARRANTYProduct Page INDEX access 14 change 14 exit 14 scrolling