1INSERT THE DATA CARD
•Switch on the S8 AUTOSET SPIRIT and wait until you see the standby (RAMP or SETTLING) screen.
•Hold the Data Card with the arrow facing up and insert it into the slot in the Data Card module
•Push the card in smoothly until it stops moving
2COPY DATA ONTO THE DATA CARD
•Data copying starts automatically when the Data Card is inserted into the Data Card module.
•The “Card Inserted Please Wait” message is displayed on the S8 AUTOSET SPIRIT LCD while data is being copied. Copying takes up to 30 seconds.
•The “Copy Complete Remove Card” message is displayed on the LCD when copying has finished.
•Remove the Data Card from the Data Card module.
3REMOVE THE DATA CARD
Grip the end of the Data Card and pull it out of the Data Card module
4STORE THE DATA CARD
Your Data Card should be stored in its mailback envelope when not in use.
5MAIL THE DATA CARD TO YOUR CLINICIAN
A bubble mailer envelope is provided to ensure safe transportation of the Data Card. When mailing the Data Card to your clinician:
1.Insert the Data Card into the pocket provided on the mailback envelope. Fold up the mailback envelope.
2.Place the mailback envelope containing the Data Card in the bubble mailer envelope and seal it.
3.Make sure that your clinician’s name and address details are on the bubble mailer envelope, and mail it back immediately.
USING THE DATA CARD TO UPDATE SETTINGS
If your clinician has provided a Data Card with new device settings:
•With the device in standby (RAMP or SETTLING) mode, insert the Data Card into the slot on the Data Card module. Updating will start automatically.
•The “Card Inserted Please Wait” message is displayed on the LCD while updating is in progress. Updating takes up to 30 seconds.
•The “Settings Success Remove Card” message is displayed on the LCD if the settings were updated successfully.
Note: This message only appears once. If you
•Remove the Data Card from the Data Card module.
•Store the Data Card in its mailback envelope when not in use.
24
