Manuals / ResMed / Household Appliance / Humidifier

ResMed s8 manual Electromagnetic Compatibility

Models: s8

1 50

Download 50 pages 57.93 Kb

Page 42

DATA CARD MODULE

Dimensions (H x W x D): 49.7 mm x 42.2 mm x 12 mm

ALL DEVICES (WHERE APPLICABLE)

Housing Construction: Flame retardant engineering thermoplastic

Environmental Conditions

Operating Temperature: +5°C to +40°C

Operating Humidity: 10%–95% non-condensing

Storage and Transport Temperature: -20°C to +60°C

Storage and Transport Humidity: 10%–95% non-condensing

Operating Altitude: sea level to 2591 m

Electromagnetic Compatibility

Product complies with all applicable electromagnetic compatibility requirements (EMC) according to IEC60601-1-2, for residential, commercial, and light industry environments. For further details, see “Guidance and Manufacturer’s Declaration - Electromagnetic Emissions and Immunity” on page 37.

Note: The manufacturer reserves the right to change these specifications without notice.

SYMBOLS WHICH APPEAR ON THE DEVICE

Attention, consult accompanying documents

Type CF equipment

Class II equipment

Drip proof

Dangerous voltage

Start/Stop and mask-fit

36

Image 42

ResMed s8 manual Electromagnetic Compatibility

Contents

S8 AutoSet Spirit System ILLUSTRATIONSBLANK MODULE H USING THE DATA CARDE HUMIDAIRE 3i AND S8 12 G DATA CARD MODULES8 AutoSet Spirit System Reorder number 338193/1Manufactured by Distributed byUS DESIGNATED AGENT ResMed Corp HOW TO ATTACH A HUMIDIFIER CONTENTSHOW TO USE THE S8 AUTOSET SPIRIT HOW TO USE THE KEYPADTROUBLESHOOTING CLEANING AND MAINTENANCEFREQUENTLY ASKED QUESTIONS SYSTEM SPECIFICATIONSINTRODUCTION MEDICAL INFORMATIONPlease read this manual carefully before use cerebrospinal fluid leak, recent cranial surgery, or trauma drying of the nose, mouth or throat nosebleed Page THE S8 AUTOSET SPIRIT SYSTEM Front cap not available in all regions C-2 Air tubing 3 m C-3 DC-12converter C-4Blank module C-5 HOW TO USE THE S8 AUTOSET SPIRIT SET UP THE S8 AUTOSET SPIRITASSEMBLE THE MASK 1Make sure the power is on excelnt MASK FIT4After three minutes, the pressure reverts to the set pressure and treatment will begin HOW TO ATTACH A HUMIDIFIER Page HOW TO USE THE KEYPAD LCD SCREENWhen you have scrolled to the item you require Table 2 Ramp and Settling Functions Setting OptionsHOW TO CHANGE THE RAMP OR SETTLING TIME ScreenPage AUTOSET WELCOME HOW TO USE THE STANDARD MENUFigure 1 shows the standard menu OFF no EPR 1 lowest EPR 2 3 highest EPRThe following table shows the setting that should be selected for each mask type HOW TO USE THE DETAILED MENU HOW TO USE THE DETAILED MENUSETTINGS MENU CPAPOFF no EPR 1 lowest EPR 2 3 highest EPR to change the option to ON or OFF Message Description Action S8 MODULES USING A BLANK MODULEUSING A RESSCAN DATA CARD MODULE Remove the Data Card from the Data Card module S8 MODULES Page WEEKLY CLEANING CLEANING AND MAINTENANCEDAILY CLEANING PERIODIC CLEANING4.Replace the air filter cover To replace the air filter2.Remove and discard the old air filter REPLACING THE AIR FILTERFREQUENTLY ASKED QUESTIONS ALTITUDE CHANGES ON AN AIRCRAFTSolution TROUBLESHOOTINGProblem Possible CauseProblem SolutionPossible Cause SYSTEM ERROR ProblemSolution Call serviceCard Error Remove Card ProblemSolution Settings Error Remove CardWeight 1.3 kg SYSTEM SPECIFICATIONSDimensions H x W x D 112 mm x 164 mm x 145 mm Power outlet for HumidAireElectromagnetic Compatibility Compliance SYSTEM SPECIFICATIONSEmissions test Electromagnetic environmentCompliance level Immunity testIEC60601-1-2 ElectromagneticIEC60601-1-2 SYSTEM SPECIFICATIONSImmunity test ComplianceRecommended separation distances between portable and mobile RF communications equipment and the S8 series of devices LIMITED WARRANTY Warranty PeriodProduct Page INDEX access 14 change 14 exit 14 scrolling