ResMed s8 manual Emissions test, Compliance, Electromagnetic environment, guidance

GUIDANCE AND MANUFACTURER’S DECLARATION - ELECTROMAGNETIC EMISSIONS AND IMMUNITY

Guidance and manufacturer’s declaration—electromagnetic emissions

The S8 series of devices is intended for use in the electromagnetic environment specified below. The customer or the user of the S8 device should assure that the device is used in such an environment.

Emissions test	Compliance	Electromagnetic environment—
		guidance
RF emissions CISPR11	Group 1	The S8 device uses RF energy only for its
		internal function. Therefore, its RF
		emissions are very low and are not likely
		to cause any interference in nearby
		electronic equipment.
RF emissions CISPR 11 with serial	Class B*	The S8 device is suitable for use in all
adapter		establishments, including domestic
		establishments and those directly
RF emissions CISPR 11 with USB	Class B	connected to the public low-voltage
adapter		network that supplies buildings used for
		domestic purposes.
Harmonic Emissions	Class A
IEC 61000-3-2
Voltage Fluctuations/Flicker	Complies
Emissions IEC 61000-3-3

*Class B for all system configurations except when a PC is attached to the S8 device via a serial adapter, in which case the system is Class A compliant. Class A is suitable for use in all establishments other than domestic and those directly connected to a low voltage power supply network which supplies buildings used for domestic purposes.

Medical Electrical Equipment needs special precautions regarding EMC and needs to be installed and put into service according to EMC information provided in this document.

Warnings: The S8 device should not be used adjacent to or stacked with other equipment.

If adjacent or stacked use is necessary, the S8 device should be observed to verify normal operation in the configuration in which it will be used.

The use of accessories (eg humidifiers) other than those specified in this manual is not recommended. They may result in increased emissions or decreased immunity of the S8 device.

SYSTEM SPECIFICATIONS 37