OPERATION
10.6 Right of Way (Highway) Mowing
•USE DOUBLE CHAIN GUARDS for highway,
•No shielding is 100% effective in preventing thrown objects. To Reduce Possibility of Injury:
1.MAINTAIN MOWER SHIELDING in good operational condition,
2.DAILY INSPECT the condition of the Thrown Object Guards, mower Side Skirts, and skid shoes: Replace or repair worn or damaged guards.
3.DAILY INSPECT the condition of the Blades and Blade Bolts. Replace any cracked, worn, bent or damage blades. Always replace blade bolts and nuts when replacing blades. Make sure the blade bolts are properly tightened.
4.RAISE CUTTING HEIGHT to 6 INCHES minimum.
5.INSPECT AREA thoroughly before mowing to REMOVE potential THROWN OBJECT HAZARDS.
6.NEVER ALLOW BLADES to CONTACT SOLID OBJECTS like wire, rocks, posts, curbs, guardrails, or ground while mowing.
ROTARY MOWERS CAN THROW OBJECTS 300 FEET OR MORE UNDER ADVERSE CONDITIONS.
TO AVOID SERIOUS INJURY OR DEATH TO OPERATOR OR BYSTANDERS FROM THROWN OBJECTS:
INSPECT AREA FOR POTENTIAL THROWN OBJECTS BEFORE MOWING:
•REMOVE debris, rocks, wire, cable, metal objects and other foreign material from area.
Wire, cable, rope, chains and metal objects can be thrown or swung outside deck with great velocity:
1.MARK objects that cannot be removed.
2.AVOID these objects when mowing.
STOP MOWING IF PASSERSBY IS WITHIN 300 FEET UNLESS:
• All THROWN OBJECT SHIELDING including Front and Rear Deflectors, Chain Guards, Steel Guards, Bands, Side Skirts and Skid Shoes are in place and in good condition when mowing.
•Mower sections or wings are adjusted to be close and parallel to ground without exposing blades.
•MOWING AREA has been inspected and foreign materials and debris have been removed.
•PASSERSBY are inside enclosed vehicle.
FN180/FN120 01/11 | Operation Section |
© 2011 Alamo Group Inc.
