85
TROUBLESHOOTING
6. TROUBLE-
SHOOTING
Message Cause Remedy
Error Messages (2/3)
Page
—
P.61
P.51
P.8
—
—
P.58
—
Press to clear the error
message.
Delete some Name Dials or
enter a shorter number.
If scanning from the exposure
glass, press and remove
your document. When scanning
from the ADF, the machine will
automatically enter redial mode.
To cancel redialling, remove
your document from the ADF.
Check the line connection.
Wait until it has finished and try
again.
When until the current opera-
tion has finished and try again.
Either use a different name, or
delete the other Name Dial and
try again.
Press to exit func-
tion mode and rectify the prob-
lem indicated on the display.
An error occurred during
transmission, or the other
line was busy.
If power was lost during the
dialing or connecting
phases of transmission, or
in fax transmission standby
mode, this message will
appear when you next turn
the machine on.
Either the maximum
number of Name Dials have
been stored (25), or you
tried to enter more than 40
digits for a destination fax
number.
The line is busy while dial-
ling with On-Hook, con-
nection failed, you dialled
the wrong number, or
there is no answer.
The line current was not
detected-the line may not
be connected.
The machine is busy print-
ing.
The machine is busy com-
municating.
The name you input for this
Name Dial already exists.
The machine is unable to
print the report or list be-
cause there is a problem
with the printer.
“Transm.error” and
“Press Stop”
“Too many numbers”
“No connection”
“No loop current”
“Printer in use”
“Machine busy”
“Name exists”
“Unable”