GETTING ACQUAINTED
2. GETTING
ACQUAINTED
11
Loading Paper

After you have set up the machine you need to load paper then specify the

paper size using the procedure below.
Important!
When loading paper into the upper paper tray , do not load mor e than 100 sheets of
plain paper (80 g/m2 or 20 lb). Overloading the upper paper tray can cause misfeeds.

Loading Plain Paper into the Upper Paper Tray

1
Fan the stack of paper to make sure that
all pages are free and are not sticking
together . The upper paper tray holds up
to 100 sheets of plain paper (80 g/m2
or 20 lb).
2Straighten up all four sides of the stack
by tapping them on a desk or tabletop.
3
Set paper into the upper paper tray.
Make sure that the top of the stack is
not higher than the limit mark on the
tray guide.
4Squeeze the tray guide and slide it
against the edge of the stack.
b(GB)6.5_Chapter 02_p10-24 99.8.3, 1:13 PM11