Ricoh 152235, 152245 Accessing User Tools (Copier/Document Server Features), Changing Default Settings

Accessing User Tools (Copier/Document Server Features)

This section is for key operators in charge of this machine. You can change or set defaults.

Note

❒Be sure to quit User Tools and re- turn to the initial copy display af- ter all the settings are finished. This section describes system set- tings that you can set for the copi- er.

❒The selected key is highlighted.

❒Any changes you make with User Tools remain in effect even if the

main power switch or operation switch is turned off, or the {Clear Modes}key is pressed.

B Press [Copier/Document Server Features ].

The Copier/Document Server Features menu appears.

C Select the menu you want to set.

The setting display for each menu will appear.

Reference4

p.85 “User Tools Menu (Copi- er/Document Server Features)”

D Change settings by following the instructions on the display panel, and then press [OK].

Reference

Exiting User Tools

For details, see "User Tools (Sys- tem Settings)", General Settings Guide.

Changing Default Settings

A Press the {User Tools/Counter}key.

The User Tools main menu ap- pears.

Note

❒When Basic Authentication, Windows Authentication, LDAP Authentication, or Inte- gration Server Authentication is set, the authentication screen will be displayed. Enter your login name and login password, and then press [Login].

A After changing User Tools set- tings, press [Exit] on the User Tools main menu.

Changes to User Tools are com- plete, and the machine is ready to copy.

Note

❒You can also quit User Tools by pressing the {User Tools/Coun- ter}key.