Copying
❖To stop the machine during a multi- copy run.
Press the {Clear/Stop}key.
2 | ❖ To return the machine to the initial | |
|
| |
|
| condition after copying. |
|
| |
|
| Press the {Clear Modes}key. |
❖When clearing entered values.
Press the {Clear/Stop}key or [Clear] on the display.
❖To check the settings.
Press the {Check Modes}key.
Interrupt Copy
Use this function if you want to interrupt a long copy job to make urgently needed copies.
Limitation
❒You cannot use the Interrupt Copy function when fax originals are be- ing scanned or the scanner func- tion is being used.
A Press the {Interrupt}key.
The Interrupt indicator goes on.
When the originals stop scanning
A Remove the originals that were being copied and place the originals you want to copy.
B Press the {Start}key.
The machine starts making the copies.
C When copying is complete, remove the originals and copies.
D Press the {Interrupt}key again.
The Interrupt indicator goes off.
E When the display prompts you, place the remaining originals again before interrupting.
FPress the {Start}key.
Note
❒The interrupt copy job set- tings will be restored and the machine will continue copy- ing from where it left off.
When the machine keeps copying
A Place the originals you want to copy.
BPress the {Start}key.
The machine stops the previous original job and starts copying the original.
CWhen copying is complete, re- move originals and copies.
DPress the {Interrupt}key again. The Interrupt indicator goes off.
The interrupt copy job settings will be restored and the ma- chine will continue copying from where it left off.
Original Beeper
The beeper sounds and an error message is displayed when you leave your originals on the exposure glass after copying.
Note
❒See p.94 “Tone: Original remains”.
18