Ricoh 152235, 152245 Changing a Stored Program, Deleting a Program, Recalling a Program

Copying

F Press [OK].

When the settings are successfully stored, m appears on the left side and the program name appears on the right side of the registered program number. The display returns to the initial copy display for a

2 while.

Changing a Stored Program

A Check the program settings.

Note

❒When you want to check the contents of a program, recall the program. See p.76 “Recalling a Program”.

B Repeat steps A to D of “Storing a Program”.

C Press [Register].

Repeat steps E, F of “Storing a Pro- gram”.

Note

❒When it is overwritten, the pre- vious program is deleted.

Deleting a Program

A Press the {Program}key.

B Press [Delete].

D Press [Yes].

The program is deleted, and the display returns to the initial copy display.

Recalling a Program

A Press the {Program}key.

B Press [Recall].

C Press the program number you want to recall.

The stored settings are displayed.

Note

❒Program numbers with m against them already have set- tings in them.

D Place the originals, and then press the {Start}key.

C Press the program number you want to delete.

76