User Tools (Copier/Document Server Features)

Note

Input/Output

❒ Default: Opposite Position

 

❖ Page Numbering in Combine

❖ Switch to Batch (SADF)

You can set page numbering when using the Combine function and the Page Numbering function to- gether.

Note

❒ Default: Per original

❖Stamp on Designating Slip Sheet

You can select to print the page

4

number onto slip sheets when us-

 

 

 

 

ing the Designate function set to

 

 

 

 

[Copy] and the Page Numbering

 

 

function together.

Note

❒Default: No

❖Stamp Position

P1, P2... Stamp Position: 1/5, 2/5...

Stamp Position: –1–, –2–... Stamp

Position: P.1, P.2... Stamp Position:

1, 2... Stamp Position: 1–1, 1–2...

You can set the position at which the stamp is printed.

Press the arrow keys to adjust the position.

❖Superimpose

You can have page numbers print- ed in white when they overlap black parts of the image.

Note

❒Default: No

❖Page Numbering Initial Letter

You can select the page numbering initial letter between "P . 1, P.2.../P.1, P.2..." and "S1, S2.../S.1, S.2...".

Note

❒Default:P.1, P.2.../P.1, P.2...

You can select to have Batch mode or SADF mode displayed when you press the [Special Original] key. See p.14 “Batch mode”.

Note

❒Default: Batch

❖SADF Auto Reset

In SADF mode, an original must be set within a specified time after the previous original has been fed. You can adjust this time from 3 to 99 seconds in increments of 1 sec- ond .

Note

❒Default: 5 seconds

❖Rotate Sort: Auto Paper Continue

You can specify to continue copy- ing when paper of the required ori- entation has run out during rotate- sorting. See p.33 “Rotate Sort”.

Note

❒If you select [No] :

•When paper of the required orientation runs out, the ma- chine stops copying and prompts you to supply copy paper. After you have loaded paper, the machine will con- tinue copying.

❒If you select [Yes] :

•Copying continues using copy paper of a different orienta- tion. The copy job will finish even if you have left the ma- chine.

❒Default: No

102