Job Preset
You can set up the next copy content during copying.
If a long copy job is in progress and you do not want to wait for it to fin- ish, you can use this function to set up the next copy job in advance. When the current copy job is finished, the next job will start automatically.
A Press [Next Job] when "Copying" is shown.
B Set up the next copy job.
C Place the originals in the ADF, and then press the {Start}key.
All originals are scanned.
D Press [To "Printing"].
Returns to the initial copy display.
After the current copy job, the next job starts automatically.
Note
❒You can switch the display to the current copy job by pressing [To "Printing"]. You can switch the display to the preset job by pressing [To "Reserving"].
Basic Procedure
2
19