Control Panel
Note
❒This illustration shows the control panel of the machine with options fully in- stalled.
1.Screen Contrast knob
Adjusts the brightness of the display pan- el.
AHU023S
6.{Program}key
Press to select the program mode. See p.75 “Programs”.
2.Indicators
Shows errors and machine status.
•d: Add Staple indicator
•D: Add Toner indicator
•B: Load Paper indicator
•L: Service Call indicator
•M: Open Cover indicator
•x: Misfeed indicator
See “Control Panel”, General Settings
Guide.
3.{User Tools/Counter}key
•User Tools
Press to change the default and condi- tions to meet your requirements.
•Counter
Press to check or print the counter val- ue.
4.Display panel
Shows operation status, error messages, and function menus.
5.{Check Modes}key
Press to check the entered copy job set- tings.
7.{Clear Modes}key
Press to clear previously entered copy job settings.
8.{Energy Saver}key
Press to switch to and from the Energy Saver mode. See General Settings Guide.
9.{Interrupt}key
Press to interrupt a long copy job to make copies. See p.18 “Interrupt Copy” .
10.Main power indicator
The main power indicator goes on when you turn on the main power. The power indicator lights when the power is on.
Important
❒Do not turn off the main power switch while the power indicator goes on or is flashing. The hard disk may malfunction.
11.Operation switch
Press to turn the power on (the On indicator goes on). To turn the power off, press again (the On indicator goes off).
5