Copier Functions

A Press [Reduce/Enlarge].

B Press [Specifd. Ratio].

C Press [Dir. Size Mag mm].

D Enter the horizontal size of the original with the number keys, and then press [#].

E Enter the horizontal size of the copy with the number keys, and then press [#].

F Enter the vertical size of the original with the number keys, and then press [#].

G Enter the vertical size of the copy with the number keys, and then press [#].

Note

To change a length, press the key you want to change and en- ter the new value.

H Press [OK].

I Press [OK].

J Place the originals, and then press the {Start}key.

Sort

The machine can scan originals into memory and automatically sort cop- ies.

Reference

2

Related initial settings

p.103 “Select Stack Function”

 

p.103 “Memory Full Auto Scan Re- start”

p.102 “Rotate Sort: Auto Paper Continue”

p.92 “Auto Tray Switching”

Sort

Copies are assembled as sets in se- quential order.

Rotate Sort

Every other copy set is rotated by 90°KL and delivered to the copy tray.

Note

To use the Rotate Sort function, two paper trays loaded with

same size and type paper, but in different orientation (KL), are required. See “ Paper Type: Tray 1–4” in “Tray Paper Set- tings”, General Settings Guide.

33