Copier Functions

B Press [Specifd. Ratio].

C Make sure that [Specifd. Ratio] is highlighted.

D Enter the length of the original with the number keys, and then press the [#] key.

Note

You can enter sizes within the following ranges:

Metric

1–999 mm

version

(in increments of 1 mm)

 

 

Inch

0.1"–99.9"

version

(in increments of 0.1")

 

 

Directional Magnification (%)

Copies can be reduced or enlarged at different reproduction ratios, horizontally and vertically.

2

CP2P01EE

E Enter the length of the copy with the number keys, and then press [#].

Note

To change the length after press- ing [#], select [Original] or [Copy] and enter the desired length.

F Press [OK].

G Press [OK].

H Place your originals, and then press the {Start}key.

1.Horizontal ratio

2.Vertical ratio

Note

You can also select a preset ratio close to the desired ratio using [Re-

duce] or [Enlarge], then adjust with

[n] or [o].

A Press [Reduce/Enlarge].

B Press [Specifd. Ratio].

C Press [Direct. Mag.%].

To enter the ratio with the number keys

APress [Horizontal].

BEnter the desired ratio with the number keys, followed by [#].

CPress [Vertical].

31