Placing Originals
Placing Originals in the Auto
Document Feeder
1 |
| Settings should be made in the fol- |
|
| lowing situations: |
❖When placing originals one by one: p.15 “SADF mode”
❖When placing originals consisting of more than 80 pages:
p.14 “Batch mode”
❖When copying originals of various sizes:
p.15 “Mixed size mode”
❖When placing custom size originals: p.16 “Placing custom size origi- nals”
Note
❒Do not stack originals beyond the limit mark on the side fence of the ADF.
❒The last page should be on the bottom.
❒Be sure not to block the sensor or load the original untidily. Doing so may cause the machine to detect the size of the scanned image in- correctly or display a paper mis- feed message. Also, be sure not to place originals or other objects on the top cover. Doing so may cause a malfunction.
A Set the document guide to the original size.
B Align the edges of the original and place it on the ADF with the side to be copied facing up.
ZGHS060E
1.Limit mark
2.Document guide
Note
❒Straighten curls in the originals before placing them on the ADF.
❒To prevent multiple sheets from being fed at once, fan the origi- nal before placing it on the ADF.
❒Set the original squarely.
Batch mode
In Batch mode, the machine copies an original including more than 80 pages as one document, even if it is placed on the ADF in parts.
A Press [Special Original].
Zewh210E
1.Sensors
14