Copying
Chapter
The page locations you specify with this function will appear on the front of copy sheets.
|
|
| Preparation |
|
|
| |
2 |
|
| Before selecting this function, |
|
|
| press [Dup./Combine/Series] and se- |
|
|
| lect Duplex (1 Sided→2 Sided) |
mode or Combine mode.
Note
❒This function can be used only
when you use the Duplex (1 Sided→2 Sided) or Combine func- tion.
❒You can specify the pages up to 20.
A Press [Cover/Slip Sheet].
F To specify another page location, repeat steps D to E.
Note
❒To select chapters 11 to 20, press the
G When page designation is com- plete, press [OK].
H Place your originals, and then press the {Start}key.
Slip Sheets
Using this function, you can insert a slip sheet between OHP transparencies or stacks. You can also print on the inserted slip sheet.
| 1 |
1 | 2 |
2 |
|
3 | 3 |
|
B Press [Desig./Chapter].
C Press [Chapter].
D Press the key to select the chapter number.
E Enter the page location of the first page of the first chapter with the number keys, and then press the {#}key.
Preparation
Before selecting this function, specify the paper tray for slip sheets. See "Slip Sheet Tray" in “Tray Paper Settings”, General Settings Guide.
Note
❒Load the slip sheets in the same size and orientation as the copy pa- per or the OHP transparency.
72