Basics

Acquiring the IP Address from the DHCP Server

To use the DHCP server to acquire the IP address, select [DHCP] from [Network Boot].

Note

You need to make settings when you use DHCP. See “Using DHCP” in the

 

Network Printing Guide.

2

To always assign the same IP address to the machine, reserve the IP ad-

 

 

dress for the machine on the DHCP server. See “Using DHCP” in the Net-

 

work Printing Guide.

 

Use the default IP address.

 

A Make sure that the [Network] key is selected, and then press the [Network

 

Boot] key.

BPress the [DHCP] key, and then press the [OK] key.

When using NetWare

To use the machine on NetWare, be sure to select the type of [NW Frame Type].

You can select the following frame types:

Auto Select (Default)

Ethernet II

Ethernet 802.2

Ethernet 802.3

Ethernet SNAP

Note

Make sure to select the frame type same as the file server.

When you select “Auto Select”, the frame type detected upon startup is au- tomatically set. Therefore, your desired frame type may not be selected by the system, which supports multiple frame types. Select the desired frame type.

To use the machine in a pure IP environment on NetWare 5/5.1, select [Ef- fective] for TCP/IP in step D.

38