User Tools (System Settings)

5

86

Interface Settings/Parallel Interface

Parallel Timing

Specifies the timing setting for the parallel interface. Under normal circum- stances, you will not need to change this setting.

Note

Default setting: ACK outside

Parallel Communication Speed

Specifies the communication speed of the parallel interface. If the communi- cation speed is set too fast, data transfer may not flow smoothly. If this occurs, change the setting to “Standard”.

Note

Default setting: High speed

Selection Signal Status

Specifies the signal setting of the parallel interface.

Note

Default setting: High

Input Prime

Specifies whether the prime signal is active or inactive when an input prime signal is sent. Under normal circumstances, you will not need to change this setting.

Note

Default setting: Invalid

Bidirectional Communication

Specifies the printer's response mode and so forth for a status request when using the parallel interface. If you experience problems when using other manufacturers, printers, set this to “OFF”.

Limitation

If this is set to “OFF”, bidirectional communication functions will not work.

Note

Default setting: ON

Signal Control

Specifies the error processing settings for when an error occurs when printing from a computer. Under normal circumstances, you will not need to change this setting.

Note

Default setting: Job acceptance priority