Playing a tape
These are the basic steps necessary to play a
tape with your cassette player. More advanced
cassette player operation is explained starting
on the next page.
WARNING
Do not use with the front panel left open, after
ejecting a cassette tape. If you do leave it open, it
may result in injury in the event of an accident.
1Tape direction indicator
Shows the direction of the tape transport.
2Play time indicator
Shows the elapsed playing time of the cur-
rent side of the tape.
1 Press TAPE EJECT.
Cassette loading slot appears.
#After a cassette tape has been inserted, press
SOURCE to select the cassette player.
2 Insert a cassette tape into the cassette
loading slot.
Front panel is closed automatically, and play-
back will start.
Cassette loading slot
#You can eject a cassette tape by pressing
TAPE EJECT.
3 Use Multi Control to adjust the sound
level.
Turn it to increase or decrease the volume.
4 To perform fast forward or rewind,
push Multi Control left or right.
FF or REW appears in the display.
#To cancel fast forward or rewind and return to
playback, press BAND.
#You can cancel fast forward or rewind by
pushing Multi Control in the same direction
twice.
5 To perform forward or rewind music
search, push Multi Control left or right
twice.
F-MS (forward music search) or R-MS (rewind
music search) appears in the display. The cas-
sette player will fast forward or rewind to the
next or previous blank spot on the tape and
begin to play.
#To cancel music search and return to play-
back, press BAND.
#You can cancel music search by pushing
Multi Control in the same direction again.
6 To change the direction of the tape
transport, press BAND.
Cassette Player
En
16
Section
05