Using the AUX source

An IP-BUS-RCA Interconnector such as the
CD-RB20/CD-RB10 (sold separately) lets you
connect this unit to auxiliary equipment fea-
turing RCA output. For more details, refer to
the IP-BUS-RCA Interconnector owners man-
ual.

Selecting AUX as the source

%Press SOURCE to select AUX as the
source.
Press SOURCE until AUX appears in the dis-
play.
#If the auxiliary setting is not turned on, AUX
cannot be selected. For more details, see Switch-
ing the auxiliary setting on page 46.

Setting the AUX title

The title displayed for the AUX source can be
changed.
1 After you have selected AUX as the
source, press FUNCTION and hold until
Title In appears in the display.
2 Press DISPLAY to select the desired
character type.
Press DISPLAY repeatedly to switch between
the following character types:
Alphabet (upper case)Alphabet (lower case)
European letters, such as those with ac-
cents (e.g. á, à, ä, ç)Numbers and symbols
3 Push Multi Control up or down to select
a letter of the alphabet.
Each pushing Multi Control up will display a
letter of the alphabet in A B C ... X Y Z, num-
bers and symbols in 1 2 3 ... @ # < order. Each
pushing Multi Control down will display a let-
ter in the reverse order, such as Z Y X ... C B
A.
4 Push Multi Control right to move the
cursor to the next character position.
When the letter you want is displayed, push
Multi Control right to move the cursor to the
next position and then select the next letter.
Push Multi Control left to move backwards in
the display.
5 Move the cursor to the last position by
pushing Multi Control right after entering
the title.
When you push Multi Control right one more
time, the entered title is stored in memory.
6 Press BAND to return to the playback
display.
Other Functions
En
50
Section
12