Introduction of advanced
tuner operation
1Preset number indicator
Shows which preset has been selected.
2LOC indicator
Shows when local seek tuning is on.
3Function display
Shows the function status.
%Press FUNCTION to display the function
names.
Press FUNCTION repeatedly to switch be-
tween the following functions:
BSM (best stations memory)Pch List (preset
memory)LOCAL (local seek tuning)
#To return to the frequency display, press
BAND.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the frequency display.
Storing broadcast frequencies
You can easily store up to six broadcast fre-
quencies for later recall.
1 When you find a frequency that you
want to store in memory press FUNCTION
to select Pch List.
Press FUNCTION until Pch List appears in the
display.
2 Push Multi Control left or right to select
the preset number.
Pushing Multi Control left or right selects the
preset tuning number. Pch-1 Pch-6 is dis-
played as the preset tuning number is se-
lected.
3 Push and hold Multi Control up to store
the radio station frequency in memory.
The selected radio station frequency has been
stored in memory.
Notes
!Up to 18 FM stations, six for each of the three
FM bands, and six AM stations can be stored
in memory.
!You can also store radio station frequencies
assigned to preset tuning numbers by press-
ing and holding one of the preset tuning but-
tons 16on the remote control.
Recalling broadcast
frequencies
You can recall radio station frequencies as-
signed to preset tuning numbers.
%Push Multi Control up to recall radio
station frequencies.
Pushing Multi Control up or down selects the
preset tuning number. 001 006 is displayed
as the preset tuning number is selected.
The radio station frequency assigned to the
preset tuning number is recalled from mem-
ory.
Tuner
En
14
Section
04