Listening to the radio
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on the next page.
1Stereo (5) indicator
Shows that the frequency selected is being
broadcast in stereo.
2Band indicator
Shows which band the radio is tuned to, AM
or FM.
3Frequency indicator
Shows to which frequency the tuner is
tuned.
1 Press SOURCE to select the tuner.
Press SOURCE until you see Tuner displayed.
2 Use Multi Control to adjust the sound
level.
Turn it to increase or decrease the volume.
3 Press BAND to select a band.
Press BAND until the desired band is dis-
played, F1,F2,F3 for FM or AM.
4 To perform manual tuning, push
Multi Control left or right.
The frequencies move up or down step by
step.
5 To perform seek tuning, push and hold
Multi Control left or right for about one
second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
#You can cancel seek tuning by pushing
Multi Control left or right.
#If you push and hold Multi Control left or
right you can skip stations. Seek tuning starts as
soon as you release Multi Control.
Tuner
En 13
English
Section
04