Note
After entering the number input mode, if you do
not perform an operation within about eight sec-
onds, the mode is automatically canceled.
50-disc multi-CD player
Only those functions described in this manual
are supported for 50-disc multi-CD players.
This unit is not designed to operate disc title
list functions with a 50-disc multi-CD player.
About the disc title list funtions, please refer to
Selecting discs from the disc title list on page
37.
Introduction of advanced
multi-CD player operation
1RPT indicator
Shows when repeat play is turned on.
2Disc indicator
Shows when repeat range is selected to cur-
rent disc.
3Function display
Shows the function status.
%Press FUNCTION to display the function
names.
Press FUNCTION repeatedly to switch be-
tween the following functions:
RPT (repeat play)Disc title listRDM (ran-
dom play)Scan (scan play)ITS.P (ITS play)
Pause (pause)COMP (compression and
DBE)
#To return to the playback display, press BAND.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the playback display.
Repeating play
There are three repeat play ranges for the
multi-CD player: MCD (multi-CD player re-
Multi-CD Player
En
32
Section
08