#Check POS appears when neither Front-L nor
Front-R is selected in the position selector mode
(Posi).
4 Push Multi Control left or right to select
the speaker to be adjusted.
Each pushing Multi Control left or right se-
lects the speaker in the following order:
F-L (front left)F-R (front right)R-R (rear
right)R-L (rear left)SubW (subwoofer)
#You cannot select SubW when the subwoofer
output is off.
5 Push Multi Control up or down to ad-
just the distance between the selected
speaker and the listening position.
Each pushing Multi Control up or down in-
creases or decreases the distance.
400 0is displayed as the distance is in-
creased or decreased, if you have selected
centimeters (cm).
160 0is displayed as the distance is in-
creased or decreased, if you have selected
inches (inch).
#You can adjust the distance for the other
speakers in the same way.
Using BBE sound
With BBE, playback very close to the original
sound can be obtained by correction with a
combination of phase compensation and
high-range boost for the delay of the high-fre-
quency components and the amplitude devia-
tion occurring during playback. This function
makes it possible to reproduce the dynamic
sound field as if you are listening to a live per-
formance.
With BBE sound processing technology, you
can adjust the level of BBE.
1 Press DSP to select SFC.
Press DSP until SFC appears in the display.
2 Push Multi Control up to turn BBE on.
BBE : 0 appears in the display.
#To turn BBE off, press Multi Control down.
3 Push Multi Control left or right to ad-
just the level of BBE.
Each pushing Multi Control left or right in-
creases or decreases the level of BBE.
+4 4is displayed as the level is increased
or decreased.
Note
Manufactured under license from BBE Sound,
Inc. The mark BBE is a trademark of BBE Sound,
Inc.
Digital Signal Processor
En 45
English
Section
10