1 Press DIRECT.
Track number input display appears.
2 Press NUMBER buttons to enter the de-
sired track number.
#You can cancel the input number by pressing
CLEAR.
3 Press DIRECT.
The track of entered number will play.
Note
After entering the number input mode, if you do
not perform an operation within about eight sec-
onds, the mode is automatically canceled.
Introduction of advanced
built-in CD player operation
1RPT indicator
Shows when repeat play is turned on.
2Function display
Shows the function status.
%Press FUNCTION to display the function
names.
Press FUNCTION repeatedly to switch be-
tween the following functions:
RPT (repeat play)RDM (random play)Scan
(scan play)Pause (pause)FF/REV (search
method)TAG (tag display)COMP (com-
pression and BMX)
#To return to the playback display, press BAND.
Notes
!When playing audio data (CD-DA), tag display
is not effective even if you turn TAG (tag dis-
play) on. (Refer to page 29.)
!If you do not operate the function within about
30 seconds, the display is automatically re-
turned to the playback display.
Repeating play
Repeat play lets you hear the same track over
again.
Built-in CD Player
En
20
Section
06