Ricoh FH-P5000MP Switching the dimmer setting, Adjusting display contrast, Selecting the digital attenuator, Switching the telephone muting/attenuation, Initial Settings

Switching the dimmer setting
To prevent the display from being too bright at
night, the display is automatically dimmed
when the cars headlights are turned on. You
can turn the dimmer on or off.
1 Press FUNCTION to select Dim.
Press FUNCTION repeatedly until Dim ap-
pears in the display.
2 Push Multi Control up or down to turn
Dim on or off.
Pushing Multi Control up or down will turn
Dim on or off and that status will be displayed
(e.g., Dim :ON).
Adjusting display contrast
Display contrast adjustment lets you adjust
the display for easier viewing when lighting
conditions change.
1 Press FUNCTION to select CONT.
Press FUNCTION repeatedly until CONT ap-
pears in the display.
2 Push Multi Control left or right to ad-
just the contrast.
Pushing Multi Control left or right will switch
between 1and 2and that status will be dis-
played.
Selecting the digital
attenuator
When listening to a CD or other source on
which the recording level is high, setting the
equalizer curve level to high may result in dis-
tortion. You can switch the digital attenuator
to low to reduce distortion.
!Sound quality is better at the high setting
so this setting is usually used.
1 Press FUNCTION to select D.ATT.
Press FUNCTION repeatedly until D.ATT ap-
pears in the display.
2 Push Multi Control left or right to
switch D.ATT high or low.
Pushing Multi Control left or right will switch
between D.ATT: HI (high) and D.ATT:LOW
(low) and that status will be displayed.
#When the source is Cassette player, the digital
attenuator setting is fixed at Low.
Switching the telephone
muting/attenuation
Sound from this system is muted or attenu-
ated automatically when a call is made or re-
ceived using a cellular telephone connected to
this unit.
!The sound turns off, MUTE or ATT is dis-
played and no audio adjustments are possi-
ble.
!Operation returns to normal when the
phone connection is ended.
1 Press FUNCTION to select Mute.
Press FUNCTION repeatedly until Mute ap-
pears in the display.
2 Push Multi Control left or right to select
the desired setting.
Each pushing Multi Control left or right se-
lects settings in the following order:
MUTE (muting)10dB ATT (attenuation)
20dB ATT (attenuation)
20dB ATT has a stronger effect than
10dB ATT.
Initial Settings
En 47
English
Section
11