Ricoh When, When using, •When memory reaches 0% during copying, •Auto Reduce/Enlarge or Auto Paper Select, •You cannot change stapling positions during copying

Supplementary Specifications

•When using this function, the following limitations apply. When the number of copies exceeds tray capacity, copying stops. When this hap- pens, remove copies from the shift tray, and then resume copying.

	Paper size	Stapler capacity
500-sheet finisher	A3L, B4 JISL, 11" ⋅ 17"L,	20 sheets (80 g/m2)
	11" ⋅ 15"L, 11" ⋅ 14"L,
	10" ⋅ 14"L, 10" ⋅ 15"L,
	81/2" ⋅ 14"L, 81/2" ⋅ 13"L
	A4KL, B5 JISK,	30 sheets (80 g/m2)
	81/2" ⋅ 11"KL, 8" ⋅ 101/2"K,
	8" ⋅ 10"K, 71/4" ⋅ 101/2"K
1000-sheet finisher	A3L, B4 JISL, 11" ⋅ 17"L,	30 sheets (80 g/m2)
	11" ⋅ 15"L, 11" ⋅ 14"L,
	10" ⋅ 14"L, 10" ⋅ 15"L,
	81/2" ⋅ 14"L, 81/2" ⋅ 13"L,
	81/4" ⋅ 14"L, 81/4" ⋅ 13"L,
	8" ⋅ 13"L
			5
	A4KL, B5 JISKL,	50 sheets (80 g/m2)
	81/2" ⋅ 11"KL, 8" ⋅ 101/2"KL,
	8" ⋅ 10"KL, 71/4" ⋅ 101/2"KL

*1 To load paper of sizes 7 1/4" ⋅ 10 1/2"L, 8" ⋅ 10"KL, 11" ⋅ 15"L, 10" ⋅ 14"L, and 10" ⋅ 15"L, use paper tray 2.

•In the following cases, copies are delivered to the shift tray without sta- pling:

•When the number of sheets for one set is over stapler capacity.•When memory reaches 0% during copying.

•When the number of copies exceeds tray capacity, copying stops. If this happens, remove the copies from the shift tray, and then resume copy- ing.

•You cannot change stapling positions during copying.•When the original image is rotated, staple orientation changes by 90°.•The maximum original image size that can be rotated is as follows:

Metric version	A4
Inch version	81/2" ⋅ 11"

•When using [Left 2] or [Top 2] with the Combine function, Double Copies, or Auto Reduce/Enlarge, the "Blank part will appear. Check ori- entation.." message may appear. If this happens, change the paper ori- entation.

•When [Left 2] or [Top 2] is selected, the following settings are useful to rotate images appropriately:

•Auto Reduce/Enlarge or Auto Paper Select•With image rotation in Auto Tray Switching of User Tools

113