Ricoh User Stamp, Note, Note, Reference, Preparation, A Press [Change], G Press [OK] twice, Select the message number, Stamp position and original orientation

Select the message number.

Copier Functions

D

E Press [All Pages] or [1st Page only] to select the print page.

Note

❒You can change the position, size, and density of the stamp. See p.63 “To change stamp posi- tion, size, and density”.

F After you have specified all necessary settings, press [OK].

G Press [OK] twice.H Place originals, and then press the {Start}key.To change stamp position, size, and densityA Press [Change].B Select the position for print, size, and density, and then press [OK].

User Stamp

Prints a registered stamp onto copies.

Preparation

You have to register a user stamp before using this function. See p.64 “To program the user stamp”.

Stamp position and original orientation

2

Note

❒You cannot use the bypass tray with this function.

❒Only one message can be stamped at a time.

❒You can combine this function with only one Preset Stamp.

Reference

Related default settings:

p.102 “Stamp Position 1 - 4”

p.103 “Stamp Format 1 - 4”

GCSTMP0E

63