Ricoh Directional Size Magnification (mm), [o], key, Note, Note, Press, Press, {Start}key, Preparation, F Press [OK], D Press [OK], D Press [Vertical]

		Copier Functions
❒ If you have incorrectly en-
	Metric	Vertical: 1–999 mm
tered the ratio, readjust it us-	version	(increments of 1 mm)
ing [n] or [o].		Horizontal: 1–9999 mm
D Press [Vertical].		(increments of 1 mm)
E Adjust the ratio using [n] or	Inch	0.1"–99.9" (increments of 0.1")
[o].	version

F Press [OK].	A Press [Reduce/Enlarge].
D Press [OK].		2
E Place originals, and then press the
{Start}key.

Directional Size Magnification (mm)

Asuitable reproduction ratios is auto- matically selected when you enter the horizontal and vertical lengths of the original and copy image you require.

B Press [Specifd. Ratio].

C Press [Dir. Size Mag mm].

D Enter the horizontal size of the original using the number keys, and then press [#].

E Enter the horizontal size of the copy using the number keys, and then press [#].

F Enter the vertical size of the original using the number keys, and then press [#].

CP2M01EE

1.Horizontal original size2.Vertical original size3.Horizontal copy size4.Vertical copy size

Preparation

Specify the vertical and horizontal sizes of the original and those of the copy, as shown.

Note

❒You can enter sizes within the fol- lowing ranges:

G Enter the vertical size of the copy using the number keys, and then press [#].

Note

❒To change a length, press the key you want to change, and then enter the new value.

H Press [OK] twice.I Place the originals, and then press the {Start}key.

39