Manuals / Brands / Computer Equipment / Printer / Ricoh / Computer Equipment / Printer

Ricoh Interrupt Copy, Left Original Beeper, Note, Note, Interrupt, Interrupt, Interrupt, Interrupt, Clear/Stop, Limitation, Clear Modes, Check Modes, -Howto operate

Models: 3025 DSm725 DSm730 IS 2225 IS 2230

1 136

Download 136 pages, 4.56 Mb

Copying

-How to operate❖To stop the machine during a multi- copy run.

Press the {Clear/Stop}key.

2		❖ To return the machine to the initial
		❖ To return the machine to the initial
		condition after copying.
		condition after copying.
		Press the {Clear Modes}key.

❖When clearing entered values.Press the {Clear/Stop}key or [Clear] on the display.❖To check the settings.

Press the {Check Modes}key.

Interrupt Copy

Use this function to interrupt a long copy job to make urgently needed copies.

Limitation

❒You cannot use Interrupt Copy with the scanner function, or when fax originals are being scanned.

A Press the {Interrupt}key.

The Interrupt indicator lights.

When the originals stop scanning

A Remove the originals that were being copied, and then place the originals you want to copy.

B Press the {Start}key.

Copying starts.

C When copying is complete, remove the originals and copies.

D Press the {Interrupt}key again.

The Interrupt indicator goes out.

E When the display prompts you, place the former set of originals again.FPress the {Start}key.

Note

❒The former copy job's set- tings are restored and the machine continues copying from where it left off.

When the machine keeps copyingA Place the originals you want to copy.BPress the {Start}key.

The machine stops the previous job and starts copying the new originals.

CWhen copying is complete, re- move originals and copies.DPress the {Interrupt}key again.

The Interrupt indicator goes out.

The former copy job's settings are restored and the machine continues copying from where it left off.

Left Original Beeper

The beeper sounds and an error message appears if you leave originals on the exposure glass after copying.

Note

❒See p.96 “Tone: Original remains”.

20

Contents

Operating Instructions Copy Reference Page Manuals for This Machine ❖Scanner Reference (PDF file - CD-ROM1) ❖Manuals for DeskTopBinder Lite [Setup] [Start] ❖Other manuals What You Can Do with This Machine Page Page TABLE OF CONTENTS 1. Placing Originals 2. Copying 3. Troubleshooting 4. User Tools (Copier/Document Server Features) 5. Specifications Notice How to Read This Manual Machine Types Functions that Require Options Control Panel 11.Operation switch 12.{Sample Copy}key 13.{Start}key 14.{Clear/Stop}key 15.{#}key Display Panel Page 1. Placing Originals Originals Sizes and Weights of Recommended Originals Sizes Detectable by Auto Paper Select ❖Inch version ❖Exposure glass ❖ADF Missing Image Area Placing Originals Original Orientation Placing Originals on the Exposure Glass Placing Originals in the Auto Document Feeder B Press [Batch], and then press [OK] [Batch] [SADF] C Place the first part of the origi- nals, and then press the {Start} key Start B Press [Mixed Size], and then press [OK] [Mixed Size] C Align the rear and left edges of the originals as shown 1.Place into the ADF 2.Vertical size Page 2. Copying Basic Procedure Interrupt Copy Left Original Beeper Job Preset Copying from Paper Tray Using Tray 2 as the Bypass Tray APress [Select Size] B Select the paper size CPress [OK] When copying onto custom size paper [2 Sided] Envelopes When copying onto envelopes A If the duplex unit is installed, open it by lifting the catch B Open the right cover by lifting the catch C Push down the green fusing unit's lever, as shown D Close the right cover E If the duplex unit is installed, close it F Press the {#}key I Place your originals, and then press the {Start}key Copying from the Bypass Tray B Push up the paper guide release lever C Lightly insert the copy paper face down, and then adjust the paper guide D Push down the paper guide release lever E Select the paper type and size APress the {#}key BPress [Custom Size] BSelect the paper type in Special paper Enter the vertical size of the pa- per using the number keys, and then press Enter the horizontal size of the paper using the number keys, and then press [Horiz mm] Copier Functions Selecting the Original Type Setting Selecting Copy Paper Auto Paper Select A Make sure [Auto Paper Select] is selected [Auto Paper Select] Manual Paper Select A Select the paper tray, bypass tray or LCT -Rotatedcopy [Auto Reduce/Enlarge] [With Image Rotation] [Without Image Rota- tion] [Off] Preset Reduce/Enlarge Zoom Auto Reduce/Enlarge Size Magnification Directional Magnification (%) Directional Size Magnification (mm) Sort ❖When the 1000-sheetfinisher is installed [Rotate Sort] B Enter the number of copy sets using the number keys Sample copy A Select Sort and any other necessary functions, and then place the originals Stack Staple ❖1000-sheetfinisher A Select one of the stapling positions B C Enter the number of copy sets using the number keys Place originals, and then press the {Start}key Duplex Originals and copy orientation 1 Sided Combine 2 Sided Combine ❖ 1 Sided 16 Pages → Combine 2 Side ❖2 Sided 4 Pages → Combine 2 Side ❖2 Sided 8 Pages → Combine 2 Side Series Copies Page Copying Book Originals ❖2 Sided→Magazine How to fold and unfold copies to make a magazine How to fold and unfold copies to make a booklet 1.Open to left 2.Open to right Image Repeat Double Copies Centring Positive/Negative Erase Border Erase Selecting [Same Width] Selecting [Diff. Width] Centre erase Margin Adjustment Background Numbering Preset Stamp User Stamp Select the stamp number C Press [User Stamp] F After all settings are complete, press [OK] H Place the original, and then press the {Start}key To change the stamp position C Press [Copier/Document Server Features ] D Press [Stamp] E Press [User Stamp] F Press [Program/Delete Stamp] G Press [Program], and then press the stamp number (1–4)you want to program Date Stamp Page Numbering Stamp position and orientation of originals C Press [Page Numbering] D Select the format G Place the originals, and then press the {Start}key Specifying the first printing page and start number If you selected (P1, P2…, -1-,-2-…,P.1, P.2…, 1, 2…, ) If you selected (1/5, 2/5…) If you selected (1-1, 1-2,…) Covers Designate Chapters Slip Sheets ❖When using OHP transparencies from the bypass tray [OHP Sheet] B Press [Slip Sheet] C Select [Copy] or [Blank], and then press [OK] D Select the paper tray containing the sheet paper to copy the origi- nals Storing Data in the Document Server Programs 2 Storing a Program Changing a stored program Deleting a Program Recalling a Program Page 3. Troubleshooting If Your Machine Does Not Operate As You Want When a Message Is Displayed Page If You Cannot Make Clear Copies If You Cannot Make Copies As You Want ❖ Edit ❖ Stamp ❖ Combine ❖ Duplex When Memory Is Full Page 4.User Tools (Copier/Document Server Features) User Tools Menu (Copier/Document Server Features) Page Page Page Page Page Accessing User Tools (Copier/Document Server Features) Exiting User Tools Changing Default Settings Settings You Can Change with User Tools General Features P.1/4 ❖Auto Image Density Priority ❖Copy Quality ❒[Custom Setting] is the value set during service setup [Sharp] [Normal] General Features P.2/4 General Features P.3/4 General Features P.4/4 Reproduction Ratio P.1/2 Reproduction Ratio P.2/2 Edit P.1/2 ❖Front Margin: Left/Right ❖Back Margin: Left/Right ❖Front Margin: Top/Bottom ❖Back Margin: Top/Bottom ❖1 Sided→2 Sided Auto Margin: TtoT Edit P.2/2 Stamp Preset Stamp P.1/4-4/4 ❖Stamp Priority [Preset Stamp] ❖Stamp Language 4Note ❖Stamp Format 1 Date Stamp ❖Format ❖Font ❖ Stamp Position Input/Output Administrator Tools Page 5. Specifications Combination Chart Supplementary Specifications ❖Zoom ❖Auto Reduce/Enlarge ❖Size Magnification ❖Directional Size Magnification ❖Sort, Rotate Sort, Stack Page ❖Staple [1 Sided 1 Sided] 2 Sided] [2 Sided •When the number of sheets for one set is over stapler capacity •When memory reaches 0% during copying •You cannot change stapling positions during copying •When the original image is rotated, staple orientation changes by 90° •The maximum original image size that can be rotated is as follows: ❖Duplex ❖Combine ❖Booklet/Magazine ❖Image Repeat ❖Centring ❖Erase ❖Margin Adjustment ❖Background Numbering ❖Preset Stamp ❖ Date Stamp ❖Page Numbering ❖ Front Cover, Front/Back Cover ❖ Designate ❖ Slip Sheets INDEX Page Page Page Page Page Page Reference Copy Instructions Operating