Copying from the Bypass Tray

Copying from the Bypass Tray

Use the bypass tray to copy onto special paper such as OHP transparen- cies, thick paper (postcards, envelopes, etc.), adhesive label paper, thin paper , and copy paper that cannot be loaded in the paper trays.

Preparation

When copying from the bypass tray, select [1 Sided] for copying in [Dup. / Combine / Series] (for example [1 Sided] [1 Sided] or [2 Sided]

[1 Sided]).

Note

The machine can automatically de- tect the following sizes as standard size copy paper:

Metric

A3L A4K, A4L, A5L, 8" ⋅

version

13"L, B4 JISL, B5 JISK, B5

 

JISL, B6 JISL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Inch

11"

L

, 8

1

/2"

14"

L

,

version

 

17"

 

 

 

81/2"

⋅ 11"L, 51/2" ⋅ 81/2"L,

 

10" ⋅

14"L

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Select the paper size when making horizontal copies.

If you non-standard size copy pa- per or special paper, you should input its vertical and horizontal di- mensions directly. See p.17 “Plac- ing custom size originals”. The sizes you can input are as follows:

Metric

• Vertical: 90.0 – 297.0 mm

version

• Horizontal: 148.0 – 600.0 mm

 

 

 

Inch

Vertical: 3.55" – 11.69"

version

Horizontal: 5.83" – 23.62"

 

 

 

When copying onto OHP transpar- encies or paper heavier than 128 g/m2 (about 34 lb.), you need to specify the paper type. See p.29

“When copying onto special pa-

per” .2

You must specify paper size when using paper (tracing paper, etc.) of less than 59g/m2 thickness.

The maximum number of sheets you can load at the same time de- pends on paper type. The maxi- mum number of sheets should not exceed the upper limit.

Some kinds of envelope might cause misfeed and wrinkle. If this happens, push down the fusing unit's green lever. See p.24 “Enve- lopes”. Also, be sure to place the front face of the envelope down- ward.

Paper of 433 mm (17.0") in length, or larger, is likely to jam, crease, or not feed in properly.

When copying onto envelopes, see p.24 “Envelopes”

A Open the bypass tray.

27