Ricoh Note, Note, Note, [Exit], [Recall], [2 Sided], [1 Sided], [1 Sided], [1 Sided], [Program], [2 Sided], [1 Sided], [1 Sided], [1 Sided], CPress [OK]

Copying from Paper Tray 2

❒Some kinds of envelopes might cause misfeeds and wrinkles. If this happens, push down the fusing unit's green lever. Seep.24 “Envelopes”. Also, be sure to place the front face of the envelope upward.

APress [Select Size].B Select the paper size.CPress [OK].When copying onto custom size paper

Note

❒If [2 Sided] is selected for copy-

ing in [Dup./Combine/Series] (for example [1 Sided] → [2 Sided]),

select [1 Sided] for copying (for example [1 Sided] → [1 Sided]).

❒Paper will be delivered auto- matically to the internal tray.

APress [Custom Size].BEnter the vertical size of the pa-per using the number keys, and then press the {#}key.CEnter the horizontal size of thepaper using the number keys, and then press the {#}key.

D To register the custom size en- tered, press the [Program] key, and then press the [Exit] key.

Note

❒If you are not registering a custom size, proceed to step

B.

❒Only one custom size can be stored.

❒To recall the custom size stored, press [Recall].

❒If you do not register the cus- tom size, the size you set is deleted when modes are cleared.

When copying onto special paper

To make copies onto special paper such as OHP transparencies, thick paper (postcards, envelopes, etc.), and adhesive label paper, you must specify the paper type in "Special paper".

Note

❒If [2 Sided] is selected for copy-

ing in [Dup./Combine/Series] (for example [1 Sided] →[2 Sided]),

select [1 Sided] for copying (for example [1 Sided] →[1 Sided]).

❒Select [Thick Paper] if the paper weight is 105 g/m2 (28 lb.) or more.

A Select paper type in "Special paper".B Press [OK].

2

23