4. Configuring the Machine Using Smart Organizing Monitor
Updating the Firmware
•To the maximum extent permitted by applicable laws, in no event will the manufacturer be liable for any damages whatsoever arising out of failures of this software, losses of documents or data, or the use or
•The company shall also not be held liable for any disputes between the customer and third parties resulting from any use or loss of use of this software.
•To make sure that a firmware update has successfully completed, print the configuration page before and after the update.
•Make sure to never disconnect the USB cable during a firmware update.
•Disconnect any unnecessary cables from the machine when running a firmware update.
•If necessary, modify power management settings on your computer in advance so that the computer will not enter standby or sleep mode when during a firmware update.
•Download the firmware from the manufacturer's Web site.
To update the firmware, use the Smart Organizing Monitor from Windows.
1.On the [Start] menu, click [All Programs].
2.Click [Smart Organizing Monitor for SP xxx Series].
3.Click [Smart Organizing Monitor for SP xxx Series Status].
4.If the machine you are using is not selected, click [Select Device...], and then select the machine's model.
5.Click [OK].
6.On the [User Tool] tab, click [Printer Configuration].
7.On the [System] tab, click [Printer Firmware Update...].
8.Click [OK].
9.Specify the location of the DWN file, and then click [Open].
10.After a message is displayed on the Smart Organizing Monitor to indicate that the firmware update has completed, turn the machine's power Off and then On again.
32
