1210
hearing protection must be used for appropriate con- ditions.
Tool Use and Care
•Do not use if switch does not turn it ON or OFF. Any tool that cannot be controlled with the switch is dangerous and must be repaired.
•Disconnect the plug from the power source before making any adjustments, changing accessories or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.
•Store idle tools out of the reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.
•Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many acci- dents are caused by poorly maintained tools.
•Use only accessories that are recommended for your tool. Accessories that may be suitable for one tool may become hazardous when used on another tool.
•Keep handles dry and clean; free from oil and grease. Allows for better control of the tool.
Service
•Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified repair personnel could result in injury.
•When servicing a tool, use only identical replace- ment parts. Follow instructions in the Maintenance Section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electrical shock or injury.
Specific Safety Information
WARNING
Read this operator’s manual carefully before using the 1210 Threading Machine. Failure to under- stand and follow the contents of this manual may result in electrical shock, fire and/or serious per- sonal injury.
Call the Ridge Tool Company, Technical Service Department at (800)
WARNING Foot Switch Safety
Using a power drive or threading machine without a foot switch increases the risk of serious injury. A foot switch provides better control by letting you shut off the motor by removing your foot. If clothing should become caught in the machine, it will con- tinue to wind up, pulling you into the machine. Because the machine has high torque, the clothing it- self can bind around your arm or other body parts with enough force to crush or break bones.
Machine Safety
•Threading Machine is made to thread and cut pipe. Follow instructions on proper use of this machine. Do not use for other purposes such as turning winches. Other uses or modifying this threading ma- chine for other applications may increase the risk of serious injury.
•Support long heavy pipe with pipe supports. This practice will prevent tipping.
•Do not wear gloves or loose clothing when oper- ating machine. Keep sleeves and jackets buttoned. Do not reach across the machine or pipe. Clothing can be caught by the pipe or machine resulting in en- tanglement and serious injury.
•Operate machine from side with REV/OFF/FOR switch. Eliminates need to reach over the machine.
•Do not use this machine if the foot switch is broken or missing. Foot switch is a safety device to prevent serious injury.
•Keep hands away from rotating pipe and fittings. Stop the machine before wiping pipe threads or screwing on fittings. Allow the machine to come to a complete stop before touching the pipe or ma- chine chucks. This practice will prevent entanglement and serious injury.
•Do not use this machine to make or break fittings. This practice is not an intended use of the machine and can result in serious injury.
•Tighten chuck handwheel and engage rear cen- tering devise on the pipe before turning on the machine. Prevents oscillation of the pipe.
•Keep covers in place. Do not operate the machine with covers removed. Exposure to moving parts may result in entanglement and serious injury.
•Allow threads to cool before handling. Threads will be hot to the touch immediately after threading.
•Use in ventilated area. Prevents accumulation of coolant vapors.
Ridge Tool Company | 3 |
