15. Angle Gauge
Used to set the fence at the proper angle.
WARNING: Before turning switch “ON”, make sure the blade guard is correctly installed and operating properly to prevent serious personal injury.
16.On-Off Switch
Turns the tool on and off. The “yellow button” is a key. When it is inserted in the switch lever, the power may be turned ON and OFF. When it is removed, the power cannot be turned ON. This feature is intended to help prevent unauthorized and possible hazardous use by children and others.
The
In an emergency, it can be turned OFF by striking it with the palm of the hand.
•Insert key into switch.
•To turn the tool “On”, insert finger under the switch lever and pull end of lever out.
•To turn the tool “Off”, push the lever in. Never leave the tool unattended until it has come to a complete stop.
•To lock the switch in the “Off” position, hold the switch in with one hand and remove the key with the other hand as shown.
WARNING: To prevent unauthorized use always lock the switch “OFF” when jointer/planer is not in use. Remove key and keep it in a safe place to prevent serious personal injury. In the event of a power failure, turn switch off. Lock it and remove the key. This will prevent the jointer/planer from starting up again when the power comes back on.
21
