|
|
|
|
| SECTION 5: MAJOR COMPONENTS |
SECTION 5: MAJOR COMPONENTS |
| ||||
FIGURE 13: Major Component Descriptions |
| ||||
|
|
|
|
| |
|
|
| Burner with Tube Gasket | Reflector (Aluminum or | |
|
|
| Must be installed with the | Stainless Steel) | |
|
|
| flame observation window | Alternate overlap as shown on | |
|
|
| facing down. | overview and on Page 17, | |
|
|
|
|
| Figure 16. Minimum overlap is |
|
|
|
|
| 6'' (16 cm). |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Burner Tube | Tube |
Supplied in 10' (3 m) lengths. | Hot rolled or heat treated |
Burner tube is always the first | aluminized tube supplied in |
tube after the burner. | 10' (3 m) lengths. |
Tube and Reflector Hanger | Coupling Assembly with Lock |
| |
with Clamp Package |
|
Position this hanger no more |
|
than 4” (10 cm) away from the |
|
burner. | Reflector End Cap |
| Punch out center section to |
| accommodate tube. |
Tube and Reflector Hanger |
|
Suspend system from these |
|
hangers. |
|
Reflector Support Strap & Wire Form
Flex Gas Line with
Shut Off Cock
Vent Adapter
Turbulator
Turbulator must be installed in the last standard section of tube. Turbulator is not required on the
11 of 59
