110
Effect List
23: PITCHSHIFT Changes the pitch of the original sound.
In addition, if you press the PAGE buttons, “Knob,” “Velo” and “Pedal” are displayed. You can then select the parameters to be
controlled with the EFFECTS CONTROL knob, the strength (velocity) used in hitting a playing surface, and the expression pedal.
24: PITCHBENDER Changes the pitch according to the input sound level. The sound following the shift in pitch can be fed back.
In addition, if you press the PAGE buttons, “Knob,” “Velo” and “Pedal” are displayed. You can then select the parameters to be
controlled with the EFFECTS CONTROL knob, the strength (velocity) used in hitting a playing surface, and the expression pedal.
Parameter Value Descriptions
Pitch -24–+24 Amount of pitch shift (in semitones)
Fine -100–+100 Cent Fine control of the pitch (in cents)
Balance D100:0W–D0:100W Level balance between the original sound (D) and the sound following the shift in pitch
(W)
Value Parameters controlled with Knob and Pedal (See the table above for details.)
OFF —
PITCH Pitch
FINE Fine
BALANCE Balance
Value Parameters controlled with Velo
(See the table above for details.)
Descriptions
OFF — —
PITCH Pitch —
FINE+ Fine The pitch becomes slightly higher as strike force increases.
FINE- Fine The pitch becomes slightly lower as strike force increases.
PENTATONIC Pitch, Balance The sound is shifted to a pitch on a pentatonic scale. This is effective
when used with sound that has a clear pitch.
INDIA Pitch, Balance The sound is shifted to a pitch on the Indian scale. This is effective
when used with sound that has a clear pitch.
WHOLETONE Pitch, Balance The sound is shifted to a pitch on a wholetone scale. This is effective
when used with sound that has a clear pitch.
Parameter Value Descriptions
Pitch 0–127 Amount of pitch shift
Sens -63–+63 Degree of pitch variation according to the input sound level
Feedback 0–98% Rate at which the sound following the shift in pitch is fed back
Balance D100:0W–D0:100W Level balance between the original sound (D) and the effected sound (W)
Value Parameters controlled with Knob and Pedal (See the table above for details.)
OFF —
PITCH Pitch
FEEDBACK Feedback
BALANCE Balance
Value Parameters controlled with Velo
(See the table above for details.)
Descriptions
OFF — —
PITCH+ Pitch The pitch to be shifted becomes higher as strike force increases.
PITCH- Pitch The pitch to be shifted becomes lower as strike force increases.
FEEDBACK Feedback —
BALANCE Balance —
SPDS_e.book 110 ページ ２００４年４月１９日 月曜日 午前９時５８分