31

Chapter 1 Making a Performance/ Creating a Patch

Chapter 1

Locking the buttons

You can lock (disable) the buttons so that a performance cannot be
interrupted if a button like [SAMPLE] is pressed by mistake while the
performance is in progress. Keep pressing [FUNC] for a while to lock the
buttons; “
lock
” will be displayed in the screen. Keep pressing [FUNC] for a
while again to unlock the buttons; “
unlock
” will be displayed.

Enabling/disabling ambience

To turn ambience

ON

, hold down [SHIFT] and press [EFFECTS], so that
“
Ambience ON
” appears in the display.
To turn ambience
OFF
, hold down [SHIFT] and press [EFFECTS], so that
“
Ambience OFF
” appears in the display.

Ambience cannot be individually enabled or disabled for different patches.

Enabling/disabling effects

To

enable

effects, press [EFFECTS] so it is lit.
To

disable

effects, press [EFFECTS] so it is not lighted.

Controlling effects

While hitting playing surfaces for a performance, turn the EFFECTS
CONTROL knob, depress the expression pedal or control the strength of your
strikes to make change to effects.

Stopping all sounds produced (ALL SOUND OFF)

Press [ALL SOUND OFF] to stop all sounds being produced.
For example, if Trigger (in WAVE SETUP in Wave Edit -> p. 46) is set to
SHOT for a long wave, sound reproduction is unstoppable midstream. In this
case, you can stop the sound by pressing [ALL SOUND OFF].

■

Notes on Giving a Performance

Number of waves that can be reproduced simultaneously

The SPD-S can reproduce a maximum of eight voices simultaneously. A wave
for which Mode (in Sampling -> p. 58) is set to STEREO or Grade (in
Sampling ->p. 58) is set to FINE has two voices. A wave in STEREO and in
FINE grade has four voices.
If you try to reproduce more than eight voices, the wave of the pad that was
hit earlier is stopped to give preference to reproducing the wave of the pad
that was struck later. In this case, reproduction of a wave for which Type (p.
45) is set to SINGLE is discontinued earlier than a PHRASE-type wave.
If you press a locked button, a
“lock!” indication appears.
For details on ambience, see p.
76.
For details on effects, see p. 92.
If you hold down [SHIFT] and
press [EXIT], changes made to
patch effects are cancelled.
Controlling effects are valid
when [EFFECTS] is lit.
SPDS_e.book 31ページ ２００４年４月１９日　月曜日　午前９時５８分