70
Chapter 6 Using a CompactFlash Memory Card
1.
Set the following parameters.
Press the PAGE buttons to change the parameter and press [-]/[+] to change the value.
While [FUNC] is depressed, the remaining memory capacity (Remain) is displayed.
2.
Press [>] so that “sure?” appears. Assign a name to the wave. The initial value is the file name specified
for Src in Step 1. Press the PAGE buttons to move the cursor under the name and press [-]/[+] to change
the character at the cursor position. When the name is complete, press [ENTER] to save it.
While saving is in progress, "now processing.." is displayed.
When you press [>] with "Src" in Step 1 set to ALL, “import all, sure?” is displayed, and wave names will be assigned
automatically. After the import is executed, the SPD-S switches to wave mode.
Do not power the unit off during execution.
3.
A “continue?” indication appears. If you press [ENTER], the SPD-S will return to the “Src” screen as in
Step 1, where you can continue your operation. If you press [EXIT], the SPD-S will go into wave mode.
* When Src is set to ALL in Step 1, “continue?” is not displayed.
Parameter Value Descriptions
Src
(Source)
File name,
ALL
Select the audio file(s) to be imported. If you select ALL, all audio files are imported.
* When there is no audio file, a “--------.---” indication is displayed.
Grade LONG,
STANDARD,
FINE
Select the grade of the wave.
LONG: produces a poorer sound quality than that of STANDARD, but consumes half
the memory space that STANDARD uses.
STANDARD: produces standard sound quality.
FINE: produces the highest sound quality but consumes double the memory space used
by STANDARD. Two voices are used in this grade.
Dst
(Destina-
tion)
I
001–399,
C
001–500
Choose the wave number (destination) to which the audio file is to be saved. The initial
value is the top number of the new (empty) waves.
When you select ALL in Src above, select the wave number to which the first file is to be
saved. The other files are automatically saved to new (empty) wave numbers in succes-
sion.
I
001–399: To the internal memory
C
001–500: To the memory card
* By pressing [CARD], you can select the top number of the internal memory or of the
memory card.
* If you hold down [SHIFT] and press [FUNC], a new (empty) wave number is selected
SPDS_e.book 70ページ ２００４年４月１９日　月曜日　午前９時５８分