51
Chapter 2 Wave Editing
Chapter 2
WAVE COPY
Copying a wave.
1.
Set the following parameters.
Press the PAGE buttons to change the parameter and press [-]/[+] to change the value.
2.
Press [>] to display “copy wave, sure?” Press [ENTER] to execute the copying, or press [<] to return to
Step 1.
While copying is in progress, "now processing.." is displayed. After execution, a “complete!” indication appears, and the
SPD-S returns to the wave mode.
WAVE DELETE
Permanently erasing the currently selected wave.
1.
“[>] to delete.” is indicated. Press [>].
If you hold down [SHIFT] and press [ALL SOUND OFF] in wave mode, you can jump to this screen.
2.
A “delete, sure?” indication appears. Press [ENTER] to execute the deletion, or press [<] to return to
Step 1.
While deleting is in progress, "now processing.." is displayed. After execution, a “complete!” indication appears and the SPD-
S returns to the wave mode.
WAVE INFO
This tells you which patches are using this wave.
When it is used, the patch number and the name are displayed. Also, the pad indicator for the pad/trigger to which it is assigned
is lit.
When it is used in multiple patches, the PAGE buttons are lit. Press the PAGE buttons to check the patches in sequence.
When it is NOT used, “not found” is displayed.
It’s a good idea to use this function before you proceed with wave editing or WAVE DELETE.
Parameter Value Descriptions
Src
(Source)
I
001–399,
C
001–500
Select the wave to be copied from.
I
001–399: From the internal memory
C
001–500: From the memory card
* By pressing [CARD], you can select the top of the internal memory or of the memory card.
* While continuing to hold down [FUNC], the remaining capacity of the memory calculated
from the grade and the mode of the wave to be copied from (Remain) is indicated.
Dst
(Destina-
tion)
I
001–399,
C
001–500
Select the wave to be copied to.
I
001–399: To the internal memory
C
001–500: To the memory card
* By pressing [CARD], you can select the top of the internal memory or of the memory card.
* If you press [SHIFT] and [FUNC], a new (empty) wave number is selected.
* While continuing to hold down [FUNC], the remaining capacity of the memory calculated
from the grade and the mode of the wave to be copied from (Remain) is indicated.
SPDS_e.book 51ページ ２００４年４月１９日　月曜日　午前９時５８分