Rose electronic Crystal View operation manual System Overview, See for the ”Hot Key” summary

SYSTEM OVERVIEW

The CrystalView uses a “Hot Key” that establishes communication to the CrystalView and not the CPU. The default “Hot Key” is the right control key. To communicate instructions to the CrystalView, press and release the “Hot Key” and within 2 seconds issue the needed command.

Example:

If you want to enter the Private Mode on a Dual model CrystalView, first press and release the right control key and within 2 seconds press the Scroll Lock key. This will place the unit in the Private mode. To exit the private mode, press and release the right control key and within 2 seconds, press the Scroll Lock key again.

Changing SW1 position 2 can change the default “Hot Key” from the right control key to the left control key.

See Table 3 for the ”Hot Key” summary.

If you need advice in designing your system layout or have a special request, contact Rose Electronics by phone or e-mail to discuss your particular remote accessing needs.

11

CrystalView Installation and Operations Manual