Rose electronic Crystal View operation manual Appendix F. Rack Mount Instructions, Appendixes

APPENDIXES

Appendix F. Rack Mount Instructions

The optional rack mount kit includes the following items:

∙Two black anodized mounting brackets.

∙Four 6 x 32 x 3/8” flat head mounting screws.

∙Mounting instructions insert.

To rack mount your CrystalView, attach the two rack mounting brackets to your unit with the short flange against the unit using the four screws provided. Secure the mounting brackets to the rack using the appropriate size bolts, nuts and lock washers. Using hardware other than that provided could cause damage to the electronics and/or result in loss of mounting integrity. Do not over tighten the screws used to mount the unit to the mounting brackets.

The following general guidelines should be observed when installing your unit into a rack.

a).	The CrystalView is designed to work in an ambient temperature of 0ο C to
	45ο C (32ο F – 113ο F).
b).	Do not block power supply vents or otherwise restrict airflow when rack-
	mounting this unit.
c).	Mechanical loading of the rack should be considered to prevent
	instability and possible tipping over.
d).	Tighten all connectors securely and provide adequate strain relief for all
	cables.
e).	Provide a grounded power source to all units. Pay special attention to
	overall branch circuit load ratings before connecting equipment to this
	source. Overloaded circuits are potential fire hazards and can cause
	equipment failures or poor performance.

42

CrystalView Installation and Operations Manual