Rose electronic ULTRAMATRIX 2xE, ULTRAMATRIX 4xE manual Ultramatrix E-SERIES Manual

Keyboard (Default: PC mode 2)

To change the keyboard type for a selected computer or configure the CPU port for a serial device, use the up/down arrow keys to select the computer whose keyboard needs changing. Use the right arrow key to select the keyboard field and press [Enter]. A selection box will display listing the supported keyboard types and serial support options. Use the up/down arrow keys to select the keyboard type or serial support needed for the selected computer and press [Enter]. The choices are:

￿PC1: Supports most IBM compatible PCs, PS/2 models, and PCs that do not use PC mode 2.

￿PC2: Supports most PCs.

￿PC3: Supports Unix workstations and servers, IBM RS/6000, SGI, HP700 or 9000 series, DEC Alpha®, or other computers.

￿USB-PC: USB PC keyboard support.

￿USB-Sun: USB Sun keyboard support.

￿Sun: Supports Sun systems*

￿Serial 9600,N,8,1: Serial support @ 9600 Baud rate*

￿Serial 4800,N,8,1: Serial support @ 4800 Baud rate*

￿Serial 2400,N,8,1: Serial support @ 2400 Baud rate*

￿Serial 1200,N,8,1: Serial support @ 1200 Baud rate*

￿	Serial	600,N,8,1:	Serial support @ 600 Baud rate*
￿	Serial	300,N,8,1:	Serial support @ 300 Baud rate*
￿	Serial	110,N,8,1:	Serial support @ 110 Baud rate*
￿	Serial	50,N,8,1:	Serial support @ 50 Baud rate*

* Available on Multi-platform models only

Mouse (Default: PS/2)

To change the mouse type for a selected computer, use the up/down arrow keys to select the computer whose mouse needs changing. Use the right arrow keys to select the mouse field and press [Enter]. A selection box will display listing the supported mouse types. Use the up/down arrow keys to select the correct mouse type for the selected computer and press [Enter]. The supported mouse types are:

￿PS/2 - 6-pin mini-Din connector with 2 or 3 buttons

￿PS/2 wheel - incorporates a small wheel for special functions.

￿Serial 2-button - connects to a computer’s COM port.

￿Serial 3-button - connects to a computer’s COM port.

Note: If you set the mouse to PS/2 and the CPUs operating system is capable of supporting a wheel mouse, the mouse type will automatically be changed to PS/2 wheel.

ULTRAMATRIX E-SERIES MANUAL

33