Selecting option 6 restores the CPU card to its original factory configuration. The following message appears:
Flash programming . . . . . . . . . . . . . . . . . . . .
When the factory defaults have been restored, the following message is displayed:
Reset to default successful
The serial options menu is then displayed, indicating that this CPU board has been reset to the factory defaults.
Option 7. Save Changes
This option saves the configuration changes made in option 1 and 2 only to the CPU card where the serial cable is attached. It is recommended that all users be logged off from all systems prior to saving any configuration changes.
To save the configuration changes, press 7, and the following message appears:
Flash programming . . . . . . . . . . . . . . . . . . .
When the flash memory is updated, the following message is displayed:
Configuration saved successfully
Option 8. Exit (Restart the Unit)
Selecting option 8 exits the serial option menu. The UltraMatrix switch will reinitialize and the diagnostic check will run. After the diagnostic check finished, the Unit is ready to use with its new configurations. If there are more configurations needed, hit the space bar within 5 seconds and the serial menu will be brought back up to use.
