Wireless 11ac Dual Band USB AdapterAC1200UBEUser Manual
| 4. The access point you wish to connect only allows network | |
|
| cards with specific MAC address to establish connection. |
|
| Please go to “About” tab and write the value of |
|
| “Phy_Addess” down, then present this value to the owner |
|
| of access point so he / she can add the MAC address of |
|
| your network card to his / her access point’s list. |
|
|
|
The network is slow / having | 1. | Move closer to the place where access point is located. |
problem when transferring | 2. | Enable “Wireless Protection” in “Advanced” tab. |
large files | 3. | Try a lower TX Rate in “Advanced” tab. |
| 4. | Disable “Tx Burst” in “Advanced” tab. |
| 5. | Enable “WMM” in “QoS” tab if you need to use multimedia / |
|
| telephony related applications. |
| 6. | Disable “WMM – Power Save Enable” in “QoS” tab. |
| 7. | There could be too much people using the same radio |
|
| channel. Ask the owner of the access point to change the |
|
| channel number. |
| Please try one or more solutions listed above. | |
|
|
|
44
