3. Installation
Figure 3.25. SFP module removal
3.12. Fiber Ethernet Ports
Depending on the order code of the product, the RuggedBackbone™ RX1510 can be equipped with several different types of fiber optic ports. The Transmit (TX) and Receive (RX) connections of each port must be properly connected and matched for proper link establishment and operation. The drawings in the following figures show a side and top view of each supported fiber optic connector type to assist in identifying the proper cable connection orientation.
Tx Rx
Figure 3.26. LC | Figure 3.27. MTRJ |
Tx Rx
Tx Rx
Figure 3.29. ST
Figure 3.28. SC
Table 3.9. Available Fiber Connector Types
RuggedCom® RuggedBackbone™ | 30 | RX1510 Installation Guide Rev 104 |
